Nettoyage intérieur :

Ouvrez régulièrement le boîtier de l'appareil pour nettoyer la poussière et les débris à l'intérieur. Utilisez de l'air comprimé sec ou un outil de nettoyage spécial pour éviter d'endommager les composants internes.

Vérifiez le système de refroidissement :

Assurez-vous que le ventilateur de refroidissement fonctionne normalement sans aucun bruit anormal ni blocage.

Nettoyez la poussière et la saleté des ventilateurs et des dissipateurs de chaleur.

Lubrifier les pièces mobiles :

Ajoutez régulièrement de l'huile lubrifiante aux parties de l'équipement qui ont besoin d'être lubrifiées pour éviter l'usure et le grippage.Étalonnage et tests :

Effectuez régulièrement l’étalonnage de l’équipement et des tests de performances pour garantir son exactitude et sa stabilité.

Utilisez des outils et des méthodes d'étalonnage professionnels et demandez à des techniciens professionnels d'effectuer l'opération si nécessaire.

Stockage et manutention

Stockage adéquat :Rangez l'appareil dans un endroit sec et frais, à l'abri de la lumière directe du soleil et de l'humidité.

Gardez l'appareil à l'écart des gaz et liquides corrosifs.Manipuler avec soin:

Lors du déplacement de l'équipement, évitez les vibrations et les collisions graves.

Utilisez l'emballage d'origine ou un matériau de protection approprié pour le transport.Mises à jour et maintenance du logiciel

Mise à jour logicielle:Vérifiez et mettez régulièrement à jour le système d'exploitation et les applications de votre appareil pour obtenir les dernières fonctionnalités et correctifs de sécurité.

sauvegarde de données:Sauvegardez régulièrement les données importantes pour éviter les pertes causées par une perte de données ou une panne d'équipement.

Entretien professionnelMaintenance régulière:

Demandez à des techniciens professionnels d'effectuer des inspections et une maintenance complètes à intervalles réguliers pour identifier et résoudre les problèmes potentiels.

dépannage:En cas de dysfonctionnement de l'équipement, dépannez-le et réparez-le en temps opportun.

Ne démontez pas et ne réparez pas vous-même des équipements complexes pour éviter de causer des dommages plus importants.Formation des utilisateurs et instructions d'utilisation

Formation des opérateurs :Assurez-vous que les opérateurs sont formés professionnellement et connaissent les spécifications de fonctionnement et de maintenance de l’équipement.

Suivez les instructions:Utilisez l'équipement strictement conformément au manuel d'utilisation pour éviter les dommages à l'équipement causés par des opérations illégales.

Grâce aux étapes et mesures ci-dessus, l'équipement peut être entretenu et entretenu efficacement pour garantir son fonctionnement stable à long terme et améliorer l'efficacité du travail et les avantages économiques.Multiple protections: Equipped with multiple protection mechanisms such as overheating, overload, short circuit, etc. to ensure safe operation.

6. Painless experience:

7. Energy adjustment: The laser energy can be flexibly adjusted according to different treatment areas and tolerance.

8. Comfort: The treatment is gentle, no anesthesia is required, and it is suitable for all skin types.

9. Versatility:

10. Integrated design: integrates multiple functions such as electrolysis and laser to meet diverse beauty needs.

11. Intelligent operation: equipped with touch screen, easy to operate and highly intelligent.

Applicable people and usage scenarios:

l For people:

People who want to achieve smooth skin through long-term hair removal.

People who need skin tightening and hope to improve sagging skin.

People who are troubled by pigmentation and want to reduce spots and restore even skin tone.

Those who need scar repair, those who hope to improve skin problems such as acne scars, surgical scars, etc.

l scenes to be used:

Professional beauty salons and medical beauty institutions.

It is convenient and quick for home use, and you can enjoy professional-level beauty care.

Large pores and fine wrinkles: Picosecond laser can promote the regeneration and repair of skin cells and improve pores and wrinkle problems.

l Scar repair:

Acne scars, surgical scars, traumatic scars: Picosecond laser can promote the regeneration and repair of skin cells, improve scar texture, and make them gradually fade.

l Skin sagging, fine lines and wrinkles: By stimulating the regeneration of collagen, the skin's elasticity is improved, achieving a firming and wrinkle-removing effect.

l other apps:

Exfoliation and improvement of skin radiance: Picosecond laser can gently remove the aged stratum corneum, promote the generation of new cells, and improve skin radiance.

Precautions

ü Applicable people: Picosecond laser is suitable for most people, but pregnant women, breastfeeding women and people with severe skin diseases should use it with caution.

ü Professional operation: Picosecond laser equipment should be operated by professional technicians to ensure the safety and effectiveness of treatment.

ü Postoperative care: After treatment, you should pay attention to skin moisturizing and sun protection, and avoid using irritating cosmetics.

Through the above introduction to the scope of application, we can see that picosecond laser is widely used in the fields of beauty and medicine. Choosing the right treatment plan and professional institution can effectively improve various skin problems and improve the overall skin quality.

Purchase and after-sales service:

ü How to buy: You can buy through the official website by contacting customer service .

ü After-sales service: Provide one-year warranty service, and the technical support team is online 24 hours a day to answer any questions you have.

ü contact us:

If you have any questions or require further information, please feel free to contact us.

Email: info@khbeautymachine.com

Official website: https://www.khbeautymachine.com

ü About Khbeauty Machine:

Khbeauty Machine is a high-tech enterprise focusing on the research and development and production of beauty equipment. We are committed to providing comprehensive beauty solutions to global users through innovative technology and quality services. Choose our equipment to make your skin glow with youthful radiance. Visit our website now for more details and purchase information.

Maintaining and servicing equipment is the key to ensuring its normal operation, extending its service life and improving its working efficiency.

 The following are some basic steps and suggestions for maintaining and servicing equipment:

Daily maintenance

cleaning equipment:

Clean dust and dirt from the surface of the device after each use.

Use appropriate cleaning agents and tools and avoid using harmful chemicals.

Check the power supply and cables:

Make sure the power cord and connecting cables are not damaged to avoid short circuit or poor contact.

Keep ventilation:

Make sure there is adequate ventilation space around the device to prevent overheating.

Regular inspection and maintenance

Internal cleaning:

Open the device casing regularly to clean out the dust and debris inside.

Use dry compressed air or a special cleaning tool to avoid damaging internal components.

Check the cooling system:

Make sure the cooling fan is running normally without any abnormal noise or blockage.

Clean dust and dirt from fans and heat sinks.

Lubricate moving parts:

Regularly add lubricating oil to the parts of the equipment that need lubrication to prevent wear and seizure.

Calibration and testing:

Regularly perform equipment calibration and performance testing to ensure its accuracy and stability.

Use professional calibration tools and methods, and ask professional technicians to perform the operation when necessary.

Storage and handling

Proper storage:

Store the device in a dry, cool place away from direct sunlight and moisture.

Keep the device away from corrosive gases and liquids.

Handle with care:

When moving the equipment, avoid severe vibration and collision.

Use original packaging or suitable protective material for transportation.

Software Updates and Maintenance

software upgrade:

Regularly check and update your device's operating system and apps to get the latest features and security patches.

data backup:

Back up important data regularly to prevent losses caused by data loss or equipment failure.

Professional maintenance

Regular maintenance:

Ask professional technicians to perform comprehensive inspections and maintenance at regular intervals to identify and resolve potential problems.

troubleshooting:

When equipment malfunctions, troubleshoot and repair it in a timely manner.

Do not disassemble or repair complex equipment by yourself to avoid causing greater damage.

User training and operating instructions

Training of operators:

Ensure that operators are professionally trained and familiar with the operation and maintenance specifications of the equipment.

Follow the instructions:

Operate the equipment strictly in accordance with the operating manual to avoid equipment damage caused by illegal operations.

Through the above steps and measures, the equipment can be effectively maintained and serviced to ensure its long-term stable operation and improve work efficiency and economic benefits.